Remote monitoring

We know what your UPS is doing. Continuously.

Most of the installed base consists of simple backup units without a communication card. UPS Smart Monitor gives them remote supervision from the outside — regardless of manufacturer, age, or whether that manufacturer still exists.

What we measure

The module is fitted in series between the mains and the UPS and measures on both sides. These UPS units produce a clean sine wave on the output, so active power can be measured reliably, not merely current.

Mains

input

UPS Smart Monitor

measuring + switching

UPS

existing unit

Backed-up circuit

e.g. emergency lighting

The module measures on both the input and the output of the UPS, plus battery set voltage and temperatures.

Quantity Location Purpose
Voltage input (mains) Outage, undervoltage, overvoltage
Current and active power input UPS draw, charging detection
Voltage UPS output Verification that the UPS is actually supplying power
Current and active power UPS output Load, luminaire function, consumption
Battery set voltage battery Discharge behaviour during the test, prediction
Ambient temperature switchboard Operating conditions
UPS temperature inside the UPS Overheating
Battery box temperature optional The strongest predictor of degradation — gel is temperature sensitive

What it tells us

That the UPS is not running at all

A switched-off or disconnected UPS is the most common finding at inspection. Monitoring reports it the same day, not a year later.

Circuit load

A deviation from the reference draw shows that some luminaires have stopped working. We report a significant deviation, not an exact count — a technician verifies that on site.

Battery set condition

The shape of the discharge curve, recharge duration and box temperature yield a health index and an estimate of remaining life in months.

That trouble is coming

The alarm arrives before a deteriorating condition becomes a failure. That is the entire difference between planned and unplanned expenditure.

Independent of your IT network

Communication runs primarily over SMS. Warehouses often have poor signal and unstable data, but SMS gets through. Where a data connection exists it carries full telemetry, with SMS remaining as fallback.

  • No changes to the customer network
  • No ports to open, no sign-off from the IT department
  • The module has its own backup power — it survives a mains failure
  • Reporting interval is configured remotely, per device

Two operating modes

Active — with testing

For emergency lighting. The module can simulate a mains failure and run a test. See the emergency lighting page.

Passive — measurement only

For systems that are not tested, such as UPS units powering smoke-extraction gate operation. It measures voltage, current, power and temperature, reports working/not working and monthly consumption. It never switches the input.

It starts with a UPS audit of the estate

We survey the whole site — including backed-up systems nobody currently keeps records of. The output is an inventory of the equipment, its condition and a proposal for what is worth monitoring. Only then does a quotation follow.